Used Compact Tractor Buyer's Checklist
Print this out or keep it on your phone. Take it with you, and don't rush.
Before you go
- Ask the seller not to start the tractor before you get there. A cold start tells you a lot.
- Ask for the serial number and hour meter reading ahead of time. Check the serial with a dealer for the model year, open recalls, and (where possible) any loan or lien on the machine.
- Ask why they're selling, how long they've owned it, and where it's been stored (in a shed or outside).
- Ask what's included: loader bucket, mower deck and its lift linkage, 3-point implements, manuals, spare filters, weights.
- Look up a few sold prices (not just asking prices) for the same model with similar hours.
- Never send a deposit by wire, gift card, crypto, or payment app for a tractor you haven't seen in person.
Walk-around (engine off)
- Puddles or wet spots where it was parked.
- Leaks at the front axle pivot, axle seals, final drives, hydraulic cylinders, and hose ends.
- Fluids: engine oil, coolant, transmission/hydraulic oil. Milky means water. Glittery means metal. Brand-new fluid on an older machine with no records is worth asking about.
- Hours vs. wear: do the pedals, seat, steering wheel, and pins look like the hours on the meter?
- Loader: cracks or fresh welds at the mounts and frame, play in the pins and bushings, bent arms.
- 3-point hitch: worn ball ends, bent lift arms, missing pins.
- Tires: tread left, sidewall cracking, the date code, mismatched sizes, rust at the rims (filled tires).
- Wiring: spliced, taped, or chewed wires. Look for rodent nests behind the dash and under the hood.
- ROPS (rollover bar): present, not cut, drilled, or welded, with a seat belt.
Cold start and running
- Starts easily from cold. Note how long it cranks.
- Smoke: a brief puff that clears is normal. Steady blue (oil), steady white, or heavy black smoke under load is a question for the seller.
- Knocks, ticks, or squeals at idle and when you rev it.
- Gauges and warning lights come on at key-on, then go out.
- Let it reach full operating temperature, then look for leaks again.
Test drive (do it yourself if you can)
- Every gear and range, forward and reverse. With hydrostatic drive, feel for hesitation, surging, or weak climbing.
- 4WD engages and disengages.
- Brakes stop it evenly. The parking brake holds.
- Steering is smooth lock to lock, without a lot of play.
- Loader: raise it fully with a load and hold it. Does it drift down? Is it slow or jerky?
- 3-point hitch: lift an implement and hold it. Does it drop?
- PTO: engages, runs without chatter or grinding, and stops when switched off.
- Run it a while. Some problems only show up once it's hot.
Paperwork and closing
- Service records, receipts, and the owner's manual if they have them.
- Serial plate matches what you were told and what goes on the bill of sale.
- A written bill of sale with the date, price, serial number, what's included, and both signatures.
- Safe payment: in person, at pickup, by a method your bank recommends for the amount.
- Plan the trip home: trailer, straps, and a truck rated for the weight.
Total cost, not just the price
- Asking price ______________
- + buyer's premium and tax (auctions) ______________
- + hauling ______________
- + first service (all fluids and filters if there are no records) ______________
- + anything you found that needs fixing ______________
- = what this tractor really costs you ______________
Want a second set of eyes on a listing? See the Tractor Deal Review at agrivid.com.